Honors

Honors

2023

Dec

25
The company (Nanjing High Speed Gear Manufacturing Co., Ltd.) and its subsidiary (Nanjing High Speed & Accurate Gear (Group) Co., Ltd.) were certified as “Green Factories in Jiangsu for 2023” by the Department of Industry and Information Technology of Jiangsu Province.

15
NGC Group won a Venus Award for China Human Resources in 2023 and the “Award for Outstanding Campus Recruitment Practice in 2023”.

14
The Group subsidiaries Nanjing High Speed Gear Manufacturing Co., Ltd., Nanjing High Speed & Accurate Gear (Group) Co., Ltd., Nanjing Nanchuan Intelligent Technology Co., Ltd. and Nanjing NGC New Energy Vehicle Transmission Equipment Co., Ltd. won the title of “Enterprises with Harmonious Labor Relations in Nanjing’s Jiangning District in 2023”.

14
The Group subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was selected among the “Top 200 Building Material Enterprises in 2023”, “Top 50 Private Building Material Enterprises in 2023” and “Top 100 Building Material Service Providers in 2023”.

07
The Group subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. won the title of “Low Carbon Stars - Enterprises with Advanced Equipment for Metallurgical Solid Waste and Tailing Treatment”.

06
The China National Intellectual Property Administration announced that the company had been honored as an “Advantaged Enterprise for Intellectual Property Rights in China for 2023”.

06
The “MGDS-EPBH220-250 Bucket Permanent Magnet Gear Drive System” of the company subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. won first prize in Jiangsu for Science and Technology Progress in the Machinery Industry, the “MTG724M2III-01 integrated gearbox for air compressor” won second prize, while the “NHJ-10 ring roll gearbox” won third prize.
Nov

18
The Brand Alliance released its China Top 500 Brands for 2023. The company’s “NGC” brand was included in this list, with a brand value of 10.546 billion yuan.

10
The Nanjing Association of Undertakings released the Top 100 Enterprises, Top 100 Manufacturing Enterprises and Top 100 Service Providers in Nanjing for 2023, with the company selected among the “Top 100 Manufacturing Enterprises in Nanjing”.

08
The Ministry of Industry and Information Technology released its list of green manufacturing enterprises in 2023, and NGC (Baotou) Transmission Equipment Co., Ltd. was included in this list of green factories.
Oct

27
The company’s “NGC and NGC Graphics” brands were honored as “Export Commodity Brands of China”.

23
The company’s president, Hu Jichun, was honored as an “Excellent Entrepreneur in Jiangsu Province” by the Provincial CPC Committee and People’s Government of Jiangsu.

11
The company received AEO Certification.
Sep

26
The company was selected among the “Top 200 Private Enterprises in Jiangsu Province for 2023” and the “Top 100 Private Manufacturing Enterprises in Jiangsu Province for 2023”.

12
The All-China Federation of Industry and Commerce released its lists of Top 500 Private Enterprises, Top 500 Manufacturing Enterprises and Top 100 Service Providers in China. The company was selected among “China Top 500 Private Manufacturing Enterprises in 2023”.

06
The “2023 Report on the Competitiveness of Global New Energy Enterprises” and the “2023 Ranking for Top 500 Energy Enterprises in the World” were released, with China High Speed Transmission Equipment Group Co., Ltd. ranking 157th.

01
The company’s “Innovative R&D and Industrial Application Project for Steel for Large-scale Forged Gears in Wind Turbine Generator Gearboxes” won third prize for Metallurgy Science and Technology.
Aug

07
The Commerce Department of Jiangsu Province announced that the company’s NGC brand was listed as part of the “International Renowned Brands to Be Developed and Fostered in Priority in Jiangsu during 2023 - 2025”.
Jul

27
The company was honored as one of the “Key Backbone Large-scale Enterprises in the Mechanical Industry” by the China Machinery Industry Federation.
Jun

30
The Joint Session Office of Jiangsu Province for the Promotion and Application of New Products and Technologies issued its “30th batch of key new products and technologies to be promoted in priority”. The company’s “SMG605AFF79-0269 wind driven generator gearbox” and “PDM370-05 subway traction drive gearbox” were included.

06
The company’s “Research and Application into Long Service Life Design and Manufacturing Technology for High-end Heavy-duty Planetary Gear Drive Systems” won second prize for science and technology progress from the Ministry of Education.

01
The “Standardization Pilot Project for High-speed and Efficient Gear Systems in Steam Turbines” of the Group’s subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was selected among the standardized pilot projects for strategic emerging industries and service industries in Jiangsu Province in 2023.
May

26
The government of Nanjing issued a “Decision of the Municipal Government on Awarding the Mayor’s Quality Award for Nanjing in 2022”. The Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was nominated as a Winning Organization of the Mayor’s Quality Award.

01
The Group subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was honored as an “Advanced Innovative Enterprise of the Provincial Machinery Industry” by the Jiangsu Provincial Association for the Mechanical Industry.
Apr

20
NGC Group was awarded the honorary title of “Outstanding HR Management - Outstanding Employer”.
Mar

26
The company was honored as one of the “Outstanding Socially Responsible Enterprise in Jiangsu Province 2022” by the Jiangsu Economic Daily and Xinhua Media Group.
Jan

07
The company passed global software CMMI-3 certification and received the corresponding certificate.

2022

Dec

28
The Company ranked 37th among the top 100 China Machinery Industry companies in 2022.

28
The Company’s “intelligent workshop for thermal treatment of large wind energy gearboxes” was commended by the Jiangsu Department of Industry and Information Technology as a “2022 Jiangsu Intelligent Manufacturing Demonstration Workshop”.

28
The “intelligent manufacturing workshop of industrial planetary transmission equipment” held by NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was commended by the Jiangsu Department of Industry and Information Technology as a “Jiangsu Intelligent Manufacturing Demonstration Workshop”.

20
NGC subsidiary was bestowed the honorable title of “Global Famous Brand for PARTS & COMPONENTS” at the 13th brand event of CMIIC2022·of the China Construction Machinery Industry Summit.

16
NGC GROUP was honorably titled “2022 Jiangsu Extraordinary Employer”.

12
The Jiangsu Department of Industry and Information Technology, together with the Jiangsu Provincial National Development and Reform Commission and the Jiangsu Provincial Department of Science and Technology, focused on promoting and applying the Directory of New Technologies and New Products (29th Edition), which included two new products, “BHPP-315C bolter miner cut-off gearbox” and “MTG470FH8011 high-speed gearbox”, produced by our subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd.

07
The Company was commended as a “Jiangsu Manufacturing Outstanding Contribution Award Excellent Enterprise” by the Jiangsu Provincial Party Committee of the CPC and the Jiangsu Provincial People's Government.

01
The “SGA Yaw and Variable Pitch Gearbox” of NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. won first prize at the Jiangsu Province Award for Science and Technology Progress in the Machinery Industry.
Nov

21
NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was bestowed the honorable title of “CHINA TOP 50 PARTS & COMPONENTS SUPPLIER” at the T50 Summit of the World Construction Machinery Industry.

15
Nanjing High Speed & Accurate Rail Transportation Equipment Co., Ltd., a rail traffic subsidiary of the Company, was commended by the Jiangsu Department of Industry and Information Technology as a “2022 Small and Medium-sized SRDI Enterprise of Jiangsu Province”.

11
The Company was commended by the Jiangsu Department of Industry and Information Technology as a “Four-star On-Cloud Enterprise of Jiangsu Province”.

10
The Company was commended by the Ministry of Industry and Information Technology as a “2022 National Technological Innovation Demonstration Enterprise”.
Oct

24
The Company passed its review for “The First Individual Champions of the Manufacturing Industry”.

11
Nanjing High Speed & Accurate Rail Transportation Equipment Co., Ltd., a rail transit subsidiary of the Company, obtained the IRIS “Silver Medal” performance level certificate.
Sep

20
The Jiangsu Provincial Department of Science and Technology issued its list of provincial-level engineering technical research centers to be built in 2022, and the Company obtained approval for the construction of the “Jiangsu High-speed and Heavy-duty Mechanical Transmission System Engineering Technical Research Center”.

17
The Company won the “2022 Jiangsu Provincial Governor Quality Award (Organization Award)” issued by the Jiangsu Provincial People's Government.

05
NGC subsidiary, Nanjing NGC New Energy Vehicles Transmission Equipment Co., Ltd., obtained IATF 16949:2016 Quality Management System Certification issued by TUV NORD and the ISO 9001:2015 Quality Management System Certificate.

01
The “SMG342ADF156 type wind generator gearbox” developed by the Company was commended by the Jiangsu Province Renewable Energy Industry Association as one of the “2022 Top 50 High-quality Innovative Products of the Chinese Wind Energy Industry”.
Aug

08
The Company’s brand, “NGC”, was commended as one of the Top 500 Chinese Brands.

04
Nanjing High Speed & Accurate Rail Transportation Equipment Co., Ltd., a rail transit subsidiary of the Company, was awarded the title of one of Nanjing City’s Gazelle Companies.
Jul

29
The award ceremony for the 2021-2022 China Metallurgical Solid Waste and Tailing Disposal & Utilization “Environmental Protection Star” was held at the site of the 5th China Metallurgical Solid Waste and Tailing Disposal & Utilization Technical Exchange 2022, with Nanjing High Speed & Accurate Gear (Group) Co., Ltd. being recognized as one of six award winners.

15
The “2022 Provincial Special Funds for the Transformation of Scientific and Technological Achievements” project was launched by the Jiangsu Provincial Department of Science and Technology, as part of which the “turbine high-speed and high-efficiency gear assembly R&D and industrialization” project under the leadership of Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was successfully approved.

11
The “2022 China Cement Industry Summit and TOP 100 Award Ceremony” was hosted by the China Cement Net (www.ccement.com) in Hangzhou. At the “TOP 100 Award Ceremony”, the company’s subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd., was awarded four prizes: the 2021 Excellent Equipment Supplier of the Chinese Cement Industry, the 2021 Energy-saving Star Supplier of the Chinese Cement Industry, the 2021 Top 100 Suppliers of the Chinese Cement Industry and the 2021 “Golden Word of Mouth” Supplier of the Chinese Cement Industry.
May

23
The Jiangsu Provincial Market Supervision Bureau and the Jiangsu Provincial National Development and Reform Commission released its list of strategic emerging industries and standardization pilot projects in the service industry for 2022. This included our Company’s “high-power wind energy gearbox standard pilot” project.

2021

Dec

30
The subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was approved to build the “Jiangsu Provincial Industrial High-speed Precision Gear Transmission Engineering Research Center”.

17
The company's thermal treatment and shot blasting technology passed certification for the TPG special process at Nadcap (National Aerospace and Defense Contractors Accreditation Program).
Nov

10
The subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. signed a strategic cooperation agreement with Siemens Energy, with the aim of further strengthening cooperation in such fields as energy sources, oil&gas, and new energy sources, in order to open up a new form of complementary technical innovation, mutual benefit and win-win cooperation.

02
The technical center of the subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was rated by the China Coal Machinery Association as a “Coal Mechanical Industrial Gear Transmission Engineering Technical Research Center”.

01
“Key Technologies for a Safe and Efficient Large-scale Wind Turbine Transmission Chain and their Application” jointly developed by the Company and 4 other institutions such as Chongqing University won first prize at the Science and Technology Progress Awards of Chongqing City in 2020.
Oct

28
The list of winners of the 2020 Jiangsu Provincial Governor Quality Award was published, and the Company was nominated as a recipient of the 2020 Jiangsu Provincial Governor Quality Award by the Jiangsu Provincial People’s Government.

09
The subsidiary Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd. was approved to build the “Jiangsu Provincial Rail Traffic Transmission Engineering Research Center”.
Sep

28
The company's “MLXSS700M large gearbox for vertical mills” won second prize for technical innovation at the 2021 “Zhongpeng Cup” hosted by the National Building Materials and Machinery Industry Association.

25
The Company was selected as one of the “2021 Top 500 Chinese Manufacturing Enterprises” as chosen by the China Association of Enterprises and China Entrepreneur Association.

23
The Company was selected as one of the “2021 Top 100 Private Manufacturing Enterprises of Jiangsu Province” as chosen by the Jiangsu Provincial Association of Industry and Commerce.

14
The Company was recognized as a “Quality Benchmark” enterprise of Jiangsu Province in 2021.

01
The Company has actively introduced APQP4WIND to existing quality management systems since 2017, and became a member of APQP4WIND in September. APQP4WIND is an authoritative, non-profit quality management organization for the wind energy industry initiated by international wind turbine manufacturers and suppliers.
Aug

04
The “Jiangsu Provincial Industrial Gear Engineering Research Center”, which was built following the application by the subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. in 2018, passed the official acceptance procedure.
Jul

28
The China Machinery Industry Federation and China Association of Automotive Manufacturers released their list of 2021 Top 100 Chinese Mechanical Enterprises, among which the Company ranked 33rd.

20
The wind power gearbox produced by Nanjing High Speed Gear Manufacturing Co., Ltd. passed the certification of “Jiangsu Quality Products”.
Jun

28
The first Chinese standard subway train developed by CRRC was successfully launched in Zhengzhou City, the gearbox for which was the standard subway 120B platform gearbox developed by Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd., a subsidiary of China Transmission.

21
The company's “FDM5C type wind turbine gearboxes, GJX206X large rotating drill winch gearboxes, GYM23P2NX large high-pressure roller press gearboxes, CHSTY495.3 high-speed gearboxes for hydrogen expander, MPH2H3200 large gearboxes for high-pressure roller press and MLXSS700M gearboxes for vertical mills” were included in the Directory of New Technologies and New Products under Popularization and Application in Jiangsu Province.

21
The PSM360-01 metro vehicle traction drive gearbox of Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd., a subsidiary of China Transmission, was included in the Directory of New Technologies and New Products under Popularization and Application in Jiangsu Province.
May

01
Nanjing High Speed Gear Manufacturing Co., Ltd. was awarded the title of “Provincial Machinery Industry Human Resources Advanced Enterprise” by the Jiangsu Provincial Machinery Industry Association.
Mar

26
Nanjing High Speed Gear Manufacturing Co., Ltd. was honored with the “2020 Nanjing Mayor Quality Award (Organization)” by the Nanjing Municipal People's Government.

12
The Jiangsu Provincial Administration for Market Regulation and the Jiangsu Provincial Development and Reform Commission published its 2020 quality and credit rating assessment results, with the Company rated as a “2020 AAA Quality and Credit Enterprise in Jiangsu Province”.

01
The subsidiary Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd. passed the ECOVADIS assessment on enterprise social responsibility and won the bronze medal. EcoVadis auditing and certification is based in France, and the evaluation system focuses on general organization information, environmental awareness, labor and human rights, business credit and sustainable procurement. Presently, the ECOVADIS certification scheme has been adopted by major transnational corporations to review their suppliers from more than 95 countries and regions.

2020

Dec

25
The Market Supervision and Administration department for Jiangsu Province published a list of approved quality credit rating results in 2020. The Nanjing High Speed Gear Manufacturing Co., Ltd. was approved as a "Jiangsu Province Industrial Enterprise AAA Quality Credit Enterprise".

14
The Industry and Informatization Office of Jiangsu Province issued a notice, identifying Nanjing High Speed Gear Manufacturing Co., Ltd. as a provincial enterprise technology center.
Nov

04
The "Innovation Center for National Advanced Rail Transit Equipment" officially opened. The Group subsidiary Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd., served as one of the founding shareholders.

01
During the domestic Covid-19 outbreak period, the company donated 10 million Yuan to the Wuhan Union Hospital, and donated a total of 30,000 sets of protective clothing and masks, along with other protective equipment, to the Nanjing Drum Tower Hospital and Jiangsu Province Hospital. The Company received the honor of being named a "Nanjing Charity Advanced Unit" by the Nanjing Charity Federation.
Oct

15
The Ministry of Science and Technology published the list of proposed projects for "Manufacturing Basic Technology and Key Components", as part of the national key research and development plan. One of these was a national key research and development project entitled "High Line Speed Lightweight Gear Transmission System Key Technology" led and undertaken by Nanjing High Precision Gear Group Co., Ltd.
Sep

20
The subsidiary Nanjing Nanchuan Intelligent Technology Co., Ltd. became a member of the Nanjing Intelligent Manufacturing Equipment Industry Promotion Association.

17
Nanjing High Speed Gear Manufacturing Co., Ltd. was awarded the title of "Top Ten Outstanding Enterprises of the 2020 China Top 50 Wind Energy Industries", as jointly approved by the Jiangsu Renewable Energy Industries Association, the China Yangtze River Economic Belt Renewable Energy Equipment Manufacturing Industry Alliance, and the Nanjing New Power (Smart Grid) Gear Association.
Aug

01
The Jiangsu Province Joint Conference Office on New Technology and New Product Dissemination and Application issued the 23rd release of the “Key Provincial Dissemination and Application of New Technology and New Product Catalogue”. The MLXSS700M vertical mill gearbox, developed and manufactured in-house by Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was listed in that directory.
Jul

30
After approval from the China National Accreditation Service for Conformity Assessment’s document review and on-site audit, the Nanjing High Speed Gear Manufacturing Co., Ltd. comprehensive testing center was awarded the accreditation certificate by the CNAS laboratory.
Jun

22
The "Nanjing Rail Traffic Transmission Engineering Technology Research Center" constructed by Nanjing High Speed &Accurate Rail Transportation Equipment Co., Ltd. was identified as a Nanjing Municipal Engineering Technology Research Center.
Jan

23
The Nanjing City Human Resources and Social Security Bureau announced that the company had been awarded the title of Nanjing Demonstration Enterprise of Harmonious Labor Relations in 2019.

2019

Dec

27
The Department of Industry and Information Technology of Jiangsu Province released the news that the “High-Speed Box for NGC495.3 Hydrogen Gas Expander”, developed and manufactured by Nanjing High Speed & Accurate Gear (Group) Co., Ltd., was identified as one of the first major equipment for Jiangsu province in 2019.

11
The 2019 Key National R&D Plan for a special focus on "Manufacturing Basic Technology and Key Components" included a project entitled “High-Power Wind Energy Spindle And Gearbox Bearing Technology Research and Application with an Industrial Verification Platform Construction”, led by Luoyang Bearing Co., Ltd, and jointly undertaken by the Nanjing High Speed Gear Manufacturing Co., Ltd. and a number of other enterprises, universities and research institutes, received project approval from the Industry Development and Promotion Center, Ministry of Industry and Information Technology

11
The Jiangsu Provincial Administration for Market Regulation released a statement in which NGC subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. was awarded the title of “2019 AA-Credited Industrial Enterprise in Jiangsu Province”.

04
NGC’s gearbox parts to be used in the RER NG project passed its audit by the SNCF, which showed that the parts are in full conformity with the SNCF’s technical specifications and requirements

01
NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd.’s MP-series rolling machine gearbox development project was awarded The Third Science and Technology Prize in the Annual Building Materials Machinery Industry 2019 by the China Building Material Machinery Association.

01
NGC was awarded the honor of being a “Selected Enterprise” by CCTV’s “Quality” Column.
Nov

27
The MIIT (Ministry of Industry and Information Technology of the People's Republic of China) announced the fourth batch of single-product manufacturing champions in manufacturing industry and the first batch of single-product manufacturing champions that had passed the review process, and NGC was among the latter.

08
NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was identified as a “Provincial Enterprise Technology Center” due to its high-end equipment research in conformity with the requirements of advanced manufacturing industry clusters.
Oct

31
The MPH2H3200 Large Gearbox for High-Pressure Rolling Machines developed by NGC subsidiary Nanjing High Speed & Accurate Gear (Group) Co., Ltd. was listed on the Jiangsu Province Catalogue of New Technologies and Products for Key Popularization and Application.

31
The NDT PAUT inspection process created by NGC subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. was awarded PRI’s (Performance Review Institute) TPG Standard Certification, which is based on the U.S. aerospace standard.

01
NGC was awarded the titles of “The Most Influential Enterprise in China’s Gear Industry” and "The Most Influential Brand in China’s Gear Industry” by the Gear and Electric Drive Branch of the China National Machinery General Parts Industry Association. Mr. Hu Yueming was also awarded the title of “Leading Figure in China’s Gear Industry”.
Sep

17
From September 17th to 19th, the "12th China International Wind Power Industry Development Summit Forum 2019” and “Award Ceremony for the Top 50 of China Wind Power Industry 2019” was jointly organized in Nanjing by the China Yangtze River Economic Belt Renewable Energy Equipment Manufacturing Industry Alliance, the Jiangsu Province Renewable Energy Industries Association, and the Jiangsu Wind Power Engineering Technology Center. NGC was awarded the title of “Top Ten Outstanding Enterprise” and its 3.X+ MW-series gearboxes were named a “Top Ten Outstanding Product”.
Aug

01
NGC was awarded “The Medal for Public Welfare Partners” issued by the Amity Foundation due to the Company’s numerous corporate social responsibility programs carried out in partnership with the Amity Foundation over the years.
Jul

09
The " Digital Design Analysis And Data Platform for Gear Transmission" Project, led by Zhengzhou Machinery Research Institute Co., Ltd, and jointly undertaken by the Nanjing High Speed & Accurate Gear (Group) Co., Ltd., relating to a total of fourteen units, also received project approval from the Industry Development and Promotion Center, Ministry of Industry and Information Technology.

01
NGC was granted “The Award for Outstanding Contributions in Jiangsu Province’s Machinery Industry” by the Jiangsu Machinery Industry Association.
Jun

01
NGC was awarded the honorary title of “National Advanced Company in the Machinery Industry”, which was jointly issued by the Ministry of Human Resources and Social Security of the People’s Republic of China as well as the China Machinery Industry Association.
May

17
The 2018 Key National R&D Plan for a special focus on "Manufacturing Basic Technology and Key Components" entitled “Key Technology and Industrial Experimentation Platform for a Large Scale Wind Gear Transmission System” led and undertaken by the subsidiary company Nanjing High Speed Gear Manufacturing Co., Ltd. was approved by the Industry Development and Promotion Center, Ministry of Industry and Information Technology.
Apr

22
Nanjing High Speed Gear Manufacturing Co., Ltd. Test Center won its laboratory accreditation certificate from the China National Accreditation Service for Conformity Assessment (CNAS). CNAS has a multilateral mutual recognition mechanism with the International Laboratory Accreditation Cooperation (ILAC), and this certification is based on international standard ISO/IEC 17025.
Mar

29
The project entitled “Research and Industrialization of Key Technology for a Megawatt Wind Power Generating System in a Complex Environment”, jointly undertaken by the China Guodian Corporation United Power Technology (Lianyungang) Co., Ltd, the China Guodian Corporation United Power Technology Co., Ltd., the Nanjing Engineering Institute and Nanjing High Speed Gear Manufacturing Co., Ltd., won third prize at the Jiangsu Province Science and Technology Awards.
Jan

31
A special heat treatment process developed by NGC subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. was awarded the PRI’s (Performance Review Institute) TPG standard heat treatment certification, which is based on the U. S. aerospace standard.

2018

Dec

13
The “high-speed train gear transmission device for more than 250 km/h”, the MIIT project to strengthen industrial development at the grass-roots level, undertaken by NGC passed the experts acceptance.
Nov

26
A subsidiary of the Group, the Nanjing High Speed & Accurate Gear (Group) Co., Ltd., was awarded the title of "Outstanding Enterprise in the Building Materials Machinery Industry during China's 40 Years of Reform and Opening Up", as issued by the China Building Materials Machinery Association.

26
The China Building Material Machinery Association held an award ceremony for enterprises that have made outstanding contributions to the building materials industry. Thanks to its advanced technology and innovation capabilities, NGC subsidiary Nanjing Speed & Accurate Gear (Group) Co., Ltd. won the title of “Outstanding Enterprise in the Building Materials Machinery Industry for the 40th Anniversary of China’s Reform and Opening Up”.

23
The Municipal Commission of Economy and Information Technology announced the results for Nanjing's recognized enterprise technology centers for 2018. A subsidiary of NGC Group, the Nanjing High Speed & Accurate Gear (Group) Co., Ltd., passed this recognition.

21
Under the guidance of the China Construction Machinery Industry Association, the Strategic Alliance for the Technological Innovation of High-end Engineering Machinery and Core Parts Industries was formally established in Xuzhou, jointly sponsored by its 54 members, with NGC serving as vice president.

14
The "Outstanding Employers" 2018 National Tour, sponsored by liepin.com, was held in Nanjing, Jiangsu province, with NGC Group receiving an award for "Outstanding Innovation Employer" 2018 in Jiangsu.
Oct

17
The Department of Science and Technology in Jiangsu province issued a notice for projects to be started in 2018 through its provincial engineering technology research center. A subsidiary of NGC Group, the Nanjing High Speed & Accurate Gear (Group) Co., Ltd., will undertake the Jiangsu province science and technology plan for "industrial gear engineering technology research center projects in Jiangsu province".
Sep

14
A subsidiary of the Group, Nanjing High Precision Rail Transportation Equipment Co. Ltd., passed the IRIS (international railway industry standard) system certification based on ISO/TS 22163:2017. The company was first awarded IRIS certification in 2012.

05
Gas turbine gearboxes made for non-nuclear facilities by Nanjing High Speed & Accurate Gear (Group) Co., Ltd., a subsidiary of the NGC Group, received its Quality Assurance System Certification from Japan’s Mitsubishi Hitachi Power Systems (MHPS).
Jul

27
In order to promote the consciousness of intellectual property rights, and to promote enterprises’ creation and utilization of IP, a subsidiary of the Group, the Nanjing High Speed Gear Manufacturing Co. Ltd., was named one of the third batch of IP demonstration enterprises in Nanjing City.

26
The Ministry of Industry and Information Technology of the People’s Republic of China announced the selection results for its 2018 National Technology Innovation Demonstration Enterprises. NGC passed this review, the second time it has passed since 2012. As a result, NGC has been selected as one of National Technology Innovation Demonstration Enterprises.

25
The NGC gearbox for the 'Renaissance' high-speed train traveling at 250 kilometers per hour successfully passed its expert technical review.

19
The NGC gearbox for the 'Harmony' CRH380B high-speed train traveling at 380 kilometers per hour was awarded CRCC railway product certification.

13
The 14th "China Machinery Industry Top 100, Auto Industry Top 30 Enterprises" information conference released its enterprise list for 2017, with NGC ranking 43rd.
Jan

23
At the 2017 Summary and Exchange Conference for Foreign Trade Business of Nanjing, held by the Nanjing Municipal Bureau of Commerce, the "NGC" brand was awarded a medal for being successfully selected as one of Jiangsu Province's "2017-2019" major international famous brands for cultivation and development.

2017

Dec

15
The NGC gearbox was awarded the title of "2017 Jiangsu Province Double 100 Brand Products”.
Oct

06
NGC gearboxes were awarded the title of one of the “50 Outstanding Brands in Shanghai and Jiangsu, Zhejiang, Anhui and Jiangxi Provinces in 2016”.
Sep

26
The "2017 National Mechanical Industry Quality Brand Promotion Conference" was held by the China Machinery Industry Federation (China Mechanical Industry Brand Strategy Promotion Committee) in Beijing. Our gearbox products under the NGC brand were awarded the title of China Mechanical Industry Brand Product at the conference.

14
The Nanjing High Speed Gear Manufacturing Co., Ltd. (subsidiary of NGC Group), was nominated among the top 50 "Outstanding Enterprises" in 2017 China's wind power industry at the “10th China (Jiangsu) International Wind Power Industry Development Summit, 2017" held in Nanjing.

05
The company’s brand construction experience "5 Dimensions of casting reliable, smart manufactured international brands” was evaluated as the "quality standard" and "China machinery industry quality brand benchmarking" in Jiangsu Province, 2017.

05
The FDM2 series of wind power gearboxes and the FDM1.6-100 series of yaw variable pitch gearboxes were evaluated as two new key products for application in Nanjing’s emerging industries.
Aug

22
79 gearbox models such as the MHB, MQ and JS were certified by the Mining Products Safety Approval and Certification Center, which laid a strong foundation to further develop the coal mine product market.
Jul

12
NGC Group was listed amongst the 5th group of demonstration enterprises for industrial brand cultivation released by the Economy and Information Technology Commission.
Jun

21
The Nanjing Science and Technology Commission released the authorized list of engineering technology research centers in Nanjing in 2017; Nanjing High Speed Gear Manufacturing Co., Ltd. (a subsidiary of NGC Group), was authorized as an industrial gear engineering technology research center of Nanjing.

20
"The research and development of 7 MW grade wind power gearbox and main shaft bearing key technology” --- one of the major projects of the national science and technology support plan led by Nanjing High Speed Gear Manufacturing Co., Ltd. (subsidiary of NGC Group), was accepted by experts in Hangzhou City.

15
Economy and Information Technology Commission of Jiangsu Province issued a public statement announcing that Nanjing High Speed Gear Manufacturing Co., Ltd. (a subsidiary of NGC Group), had been identified as a pilot demonstration enterprise for innovation in Internet and industrial integration in Jiangsu Province, 2017.
May

05
The PDM370-01 model subway gearbox was nominated for inclusion in the new product list for the promotion and application of new technology in the Jiangsu Province.
Mar

28
Nanjing High Speed Gear Manufacturing Co., Ltd. (a subsidiary of NGC Group), was awarded the Customs AEO Advanced Certification, which is the highest certification under WTO rules. AEO enterprises are customs certification enterprises and the advanced certification is the highest credit rating for customs enterprises.

22
The Jiangsu Provincial Party Committee and Provincial Government held the province's manufacturing conference; the Company was rated as a Manufacturing Enterprise with Outstanding Contributions in Jiangsu Province (technological innovation demonstration enterprises).

05
Nanjing High Speed Gear Manufacturing Co., Ltd. (subsidiary of NGC Group), received the Quality Award Nomination by the mayor of Nanjing City.
Feb

24
The Jiangsu Province Science and Technology Award Conference was held in Nanjing; Nanjing High Speed Gear Manufacturing Co., Ltd. (subsidiary of NGC Group) won the 2016 Award for Enterprise Technology Innovation.

2016

Nov

24
MIIT released the first batch of single-item demonstration (cultivating) enterprises in manufacturing. NGC was recognized as a “single-item demonstration enterprise in manufacturing for 2016” due to its wind gearbox.
Oct

13
The political and commercial delegation led by Sören Link, the mayor of Duisburg, Germany, visited NGC, accompanied by Peter Rothen, the consul general of the Consulate General of Germany in Shanghai, and Xu Jun, the CEO of NRW.INVEST in Nanjing.

01
The Company was awarded as a “Top-50 Self-Owned Brand” enterprise in 2015 for Jiangsu Province.
Jul

01
The 11th China Heat Treatment Week was held in Lanzhou. During the week, the Company was highly rated and honored as an innovation demonstration base of heat treatment technology (high-speed heavy-duty gears).
Jun

12
Jiangsu Provincial Commission of Economy and Information Technology released the list of management innovation demonstration enterprises of 2015. Our company was one of those names listed.
May

11
Zhang Haitao, the Vice President of ACFTU in Jiangsu Province, visited Nanjing High Accurate Marine Equipment Co., Ltd, and investigated on the influences that reform on the supply side has on corporate operations and ACFTU.
Mar

01
The PT350 5,600-ton rig gear was certified as the first grand installation product of Jiangsu Province.
Jan

02
Nanjing High Speed Gear Manufacturing Co., Ltd (a subsidiary of NGC) took social responsibilities and made great contributions together with Sino-Dutch MBA in the Sino-Dutch Case Study and was awarded the “2015 Best Cooperation Relationship Award of the Sino-Dutch MBA at Nanjing University”.

2015

Dec

02
Nanjing Science & Technology Committee released the 2015 list of companies certified by Nanjing Engineering Technology Research Center. The “Nanjing Digit-Control Heavy-Machine Engineering Technology Research Center” by China Transmission Heavy Machine Tool (a subsidiary of NGC) was certified and listed.
Oct

29
Xu Ming, a member of the CPC Municipal Committee and Vice President of Jiangsu Province, visited Nanjing High Accurate Marine Equipment Co., Ltd, and investigated the development of maritime equipment enterprises and maritime economical demonstration projects.
Sep

01
The Company was awarded as a “Top-50 Self-Owned Brand” enterprise in 2014 for Jiangsu Province.
Jun

01
Nanjing High Speed Gear Manufacturing Co., Ltd (a subsidiary of NGC) became a council member of the Jiangsu Renewable Energy Industry Association.
Apr

27
Nanjing High Accurate Marine Equipment Co., Ltd. was honored as “Jiangsu enterprise intellectual property management standardization demonstration unit" by the Jiangsu Quality and Technical Supervision Bureau and Jiangsu Intellectual Property Office.
Jan

29
The 2014 China Machinery Industry Science and Technology Award Conference was held in Beijing, and NGC’s “high-power wind energy unit development and demonstration” project was awarded the special award of China Machinery Industry Science and Technology.

23
The “NFT275 constant pitch lateral thrust propeller” developed by Nanjing High Accurate Marine Equipment Co., Ltd. was awarded 2nd prize for 2014 Nanjing Science and Technology.

09
The “2014 National Science and Technology Award Conference” was held in the Great Hall of the People in Beijing. The “key technology and industrialization of high-end heavy-duty gear transmission device” led and unveiled by NGC won 2nd prize for scientific and technological progress in China.

2014

Dec

31
The 2014 Jiangsu famous brand appraisal and selection results were released, with the “NGC gearbox” affirmed as a Jiangsu famous brand product by the Jiangsu Promotion Commission for Famous Brand Strategy.

30
The Department of Commerce, Jiangsu Province released the list of 3rd batch of regional headquarters and functional institutions of multinational companies in Jiangsu Province, and NGC was identified as one of the regional headquarters for multinational companies in Jiangsu Province.

28
Jiangsu Provincial Association of Machinery Industry released its review results for the 2014 Jiangsu Machinery Industry Science and Technology Progress Award, and the “constant pitch rudder propeller in NRP250 and below specification” developed by Nanjing High Accurate Marine Equipment Co., Ltd. Won the first prize.
Oct

24
The Ministry of Science and Technology issued its 2014 notice on national science and technology program projects, with the “FD2250G model of wind turbine gearbox” developed by NGC passing project approval to be included in the 2014 National Key New Product Program.

18
Miao Ruilin, Deputy Secretary of CPC Nanjing Municipal Committee and Mayor of Nanjing Municipality, visited NGC subsidiary Nanjing J-Crystal Photoelectric Technology Co., Ltd., for a review.

01
The offshore platform propulsion system and elevating system developed by Nanjing High Accurate Marine Equipment Co., Ltd. was honored as a national torch plan industrialization demonstration project by the Ministry of Science and Technology.
Sep

25
The China Machinery Industry Science and Technology Awards Office released the review results of the 2014 China Machinery Industry Science and Technology Award, and NGC’s high-power maritime vessel controllable pitch propeller propulsion systems project won the third prize.

16
The “NGC” brand was rated as “2014-2016 International Famous Brand Specially Cultivated and Developed by Jiangsu Province” by the Department of Commerce, Jiangsu Provinc
Jul

25
Nanjing Economic and Information Commission released the 2014 Catalog of New Products Specially Promoted and Applied in Emerging Key Industries of Nanjing (1st Batch), and the “maritime vessel controllable pitch propeller propulsion system” developed by NGC Marine was listed in this catalog.
Jun

13
The Jiangsu Economic and Information Technology Commission released the 2014 Jiangsu Identified Public List of the First Unit (Set) of Major Equipment and Key Components, with NGC-developed products listed therein, including the “JDTS1350 underwater reamer gearbox” and the “MLXSS540 dual planetary vertical mill reducer”.
May

14
NGC subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd was honored as a syndic unit of Jiangsu Province Renewable Energy Association.
Apr

28
The New Technology and New Product Catalog (5th Batch) specially promoted and applied by Jiangsu Province was published, and the “maritime vessel controllable pitch propeller propulsion system” developed by NGC was listed in this catalog.
Mar

31
The New Technology and New Product Catalog (4th Batch) specially promoted and applied by Jiangsu Province was published, and the PCG-01 model of metro gearbox developed by NGC was listed in this catalog.
Feb

24
Zhong Shan, International Trade Negotiation Representative and Deputy Minister of the Ministry of Commerce, visits the Company for an inspection and investigation.
Jan

10
The 5th Supplier Conference of Goldwind Science & Technology Co.,Ltd. was held in Beijing, and NGC won the 2013 “Quality Excellence Award”.

2013

Dec

27
The first “Summit on Dialogue with Jiangsu Entrepreneur Leaders” is hosted by the Jiangsu Economic and Information Technology Commission in Nanjing, during which subsidiary Nanjing J-Crystal Photoelectric Science & Technology Co. Ltd. is awarded as the Remarkable Enterprise Award of Transformation and Innovation.
Nov

27
The Company’s “NRP 250 fixed pitch rudder propeller” is honored with the 2013 Jiangsu Golden Award for Outstanding New Products.

19
The industrial design center of subsidiary Nanjing High Accurate Marine Equipment Co., Ltd. is rated as the 2013 Jiangsu Industrial Design Center.

15
The Jiangsu Office of the Spiritual Civilization Development Steering Commission holds the commendation conference to commend advanced civilization units in the province that have made remarkable achievements. The Company is awarded the title of 2010-2012 Jiangsu Civilization Unit.

01
Subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. is rated by the Wind Power Industry Innovation Evaluation Committee as a 2013 Top 10 Innovative Enterprise of the Wind Power Industry.
Oct

28
Subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. is rated as a Key High-Tech Enterprise of the National Torch Plan.

08
The “key technology research and industrialization of wind-power marine high-end gear transmission system” project completed by subsidiary Nanjing High Speed Gear Manufacturing Co., Ltd. and other institutions is rated as the 2013 First Place in the China Mechanical Industry Science & Technology.
Aug

28
The Company’s NRP250 fixed pitch rudder propeller is rated as the 2014 First Major Device and Key Component of Jiangsu.
Jul

19
CPC Central Committee Politbureau Member and Chinese Vice Premier Wang Yang visits the Company for an inspection and investigation.
Mar

15
The Nanjing Municipal Government holds a conference on the business work of the city in the city hall. The Company is awarded the title of 2012 Trade Work Outstanding Enterprise of the City.

2012

Dec

10
The “NGC reducer” manufactured by subsidiary Nanjing High-Speed & Accurate Gear Group Co., Ltd. is awarded the title of Jiangsu Key Brand Product.
Nov

26
The National Ministry of Science and Technology, the State-owned Assets Supervision and Administration Commission of the State Council and the All China Federation of Trade Unions jointly issue a circular that confirming the Company as the fifth national innovation pioneer enterprise.

16
The Company’s technology center is recognized as the National Approved Enterprise Technology Center at the award ceremony for national enterprise technology centers held at the Shenzhen International Expo Center.

05
The National Ministry of Industry and Information Technology and National Ministry of Finance announce the list of 2012 national technology innovation model enterprises. The Company is listed.
Oct

20
China Transmission Heavy Equipment Co., Ltd. hosts the 2012 Annual Meeting of the China Coal Electromechanical Expert Committee. The meeting discusses development trends in the Chinese coal industry.
Jun

05
The Jiangsu Opening Up Work Conference is held. The Company is honored as Jiangsu Open Economy Advanced Enterprise by the Provincial Party Committee and Provincial Government.
Apr

19
The three NGC developed overhang heading machines - EBZ132, EBZ160 and EBZ200 acquire safety certificates for mining equipment.
Mar

29
Han Qide, NPC Vice Chairman and Chairman of the Jiusan Society, visits NGC.
Feb

28
The Jiangsu Energy Working Meeting is held in Nanjing. NGC is awarded as the 2011 Jiangsu Advanced Energy Enterprise based on its outstanding contributions to wind energy.

2011

Dec

21
Deloitte China publicizes the appraisal results of the Top 20 Chinese Clean Technology. NGC, the only enterprise selected as a wind power drive equipment manufacturer, is ranked 16th.
Nov

10
NGC successfully develops the 6MW wind turbine yaw and pitch gearboxes .
Sep

27
The 2011 Top 500 Global New Energy Enterprises is released at the China (Chengdu) New Energy International Summit. NGC ranks 79th.
Aug

15
The Jiangsu Commerce Department holds a work conference on export brands at the Nanjing Mandarin Garden Hotel. The Company is elected as the 2011-2013 Jiangsu Provincial Key International Brands to be Cultivated and Developed.
Jul

28
The Ocean Oil No. 255, installed with the Company’s fire pump gearbox, successfully finishes sea trials, marking a new stage in the Company’s developments in the marine auxiliary market.
May

27
The “2011 Information Meeting On the Top 100 China’s Machinery Industry Enterprises & Top 30 Automobile Industry Enterprises and Machinery Industry Development Strategy Seminar” is held in Beijing. The Company is ranked 35th in the 2010 China’s Machinery Industry Top 100.
Mar

25
The Company announces its annual results, with sales revenue in 2010 reaching RMB7.393 billion, a year-on-year increase of 30.9%; of which, sales revenue in the wind power drive equipment sector accounts for RMB5.458 billion, a year-on-year increase of 43.4%.

2010

Dec

24
Liu Qi, Deputy Director of the National Energy Administration, and his entourage visit the Company.
Jul

30
The release conference for the 2010 Research Report on the Top 500 Chinese Machinery Manufacturers and the Top 500 Global Machinery Manufacturers was held in the Great Hall of the People in Beijing. The Company is ranked 142th in the Research Report of the Top 500 Chinese Machinery Manufacturers.
May

19
Over 40 CPPCC Standing Committee members, led by Zheng Wantong, CPPCC Vice Chairman, and accompanied by Zhang Lianzhen, Jiangsu CPPCC Chairman, visit our wind production facility.

2009

Dec

01
The Company wins the title of National Enterprise Culture Construction Top 100.
Nov

30
Rotating President of the European Union and Swedish Prime Minister Fredrik Reinfeldt and his entourage visit the Company.
Jul

01
President and General Manager Hu Yueming won the title of “The Star of National Machinery Industry Entrepreneurs”.
Apr

22
Standing Committee Member of the CPC Central Committee Politburo, Secretary of the Secretariat of the Central Committee and Vice President, Xi Jinping and CPC Central Committee Politburo Member, Secretary of the Secretariat of the Central Committee and Head of the CPC Central Committee Organization Department Li Yuanchao visit the Company for an inspection and investigation.

10
Chen Changzhi, Vice Chairman of the NPC Standing Committee visits the Company for an inspection and investigation.

01
The Company wins the Jiangsu Labor Award.

01
The Company wins the title of Management Model Enterprise and Modern Management Enterprise from the National Machinery Industry.
Feb

13
CPC Central Committee Politburo Member and State Councilor Ms. Liu Yandong visits the Company for an inspection and investigation.

02
Standing Committee Member of the CPC Central Committee Politburo and Chinese Vice Premier Wang Qishan visits the Company for an inspection and investigation.
Jan

10
Standing Committee Member of the CPC Central Committee Politburo and Chinese Premier Wen Jiabao visits the Company. Premier Wen Jiabao was very pleased to see the good spirits of our staff and the developing trend of the enterprise. In a short message, he spoke to staff, saying that “I feel inspired after visiting your factory. Even in these difficult economic times, the business outlook of your company is positive and optimistic. Why is this? It is because you are standing at the forefront of the wind power industry. This is an industry which is badly needed in the international marketplace today. It tells us the simple truth that we must grasp opportunities and market shares in order to cope with financial crises. What shall we depend on? We depend on competitive products! I wish you continued success.”

2008

Oct

31
CPC Central Committee Politburo Member and Vice Premier Zhang Dejiang visits the Company for an inspection and investigation.
Jan

10
The Company is honored as Leading Enterprise of the Chinese Industrial Sector in 2008.

2007

Sep

15
The NGC gearbox wins the title of China Famous Brand Product.
Apr

20
President and General Manager Hu Yueming wins the title of National Labor Award.

2006

Jul

11
The Company is granted the China Informatization Top 100 Award.
Jun

18
The Company receives the certificate of National Class II Machinery Manufacturing Enterprise on Safety Quality Standardization.

05
The Company’s FDP/FDB1.5MW wind turbine yaw and pitch gearbox are awarded the Outstanding New Products of the Chinese Gear Industry Top Award.
Apr

11
The Company’s FDP/FDB1.5MW wind turbine yaw and pitch gearboxes are accepted by the Certification of Jiangsu Scientific and Technological Achievements.
Mar

20
The Company’s 825KW wind power gearbox passes the Identification of Jiangsu Scientific and Technological Achievements.
Feb

11
MFY, MLX, and MBY series products under the NGC brand are awarded the title of Famous Brand of the Chinese Construction Materials Industry.

2004

May

12
The Company wins the title of National User Satisfaction Enterprise on Product Quality and Service.
Feb

20
The NGC gearbox wins the title of National Consumer Quality Trustworthy Product.

2003

Mar

01
The Company is listed in the 2003 China Machinery Top 500.
Feb

10
The Company is listed in the 2003 China Enterprise Informatization Top 500.

2002

May

10
The Company wins the title of 2002 Star of Competitiveness in the Chinese Machinery Industry.

2000

Mar

01
The National Computer Integrated Manufacturing System (CIMS) Demonstration Project - the Computer Integrated Manufacturing System of Nanjing High Speed Gearboxes Factory (NGC-CIMS) is accepted by the Acceptance Committee.

1999

Jun

01
Our total output value in the gear industry ranks among Top 100.

1998

May

20
The Company wins the title of Equipment Manufacturer with Outstanding Quality for Baosteel Phase III.

1986

Jun

05
The Company’s key project of the Sixth Five-Year Plan, “basic technical research into high-speed and heavy-duty gears", receives approbation from the Ministry of Machine Building and Electronics Industry (MMBEI) and wins first place in the MMBEI Science and Technology Awards. At the Sixth Five-Year Plan Achievement Awards held in Beijing, Peng Zhen, Chairman of the NPC Standing Committee, writes the inscription: "Gear is the key, the key is in the gear, let’s do our best."

Geared for a Better Future

Global leader in wind power drive equipment